The Automatic Swing Door is ideal for numerous commercial structures with a high volume of pedestrian access and where a sliding entryway is not practical, and space is at a higher cost than normal.
The essential door set involves a Door Leaf and Frame which can be provided in either single or double Leaf. The entryways can be fitted to Pivot either Inwardsor Outwards as per your demand and the ambient requirements.
The doors can be provided to substitute old or Faulty Manual Doors, or as a complete Entrance System with the alternative of Fixed Side Screens and transom Panels.
The Door leaf and Frame are built from an Aluminum Profile with inside propping shape a door set with the inbuilt quality or Frameless 12mm Clear HardenedGlass.
The Dorset’s can be delivered in a wide range of shades by Polyester PowderCovering the Edge to any RAL tone. On the other hand, the entryway can be furnished with a Silver or Bronze Anodized Finish or even Stainless Steel completely Frameless Hardened Glass Door.
The Automatic Swing Door administrator which controls the entryway is contained inside an overhead header unit. This unit contains the Motor and microprocessor Regulator complete with a Multi-position Control Switch to set the methods of Operation.
The most widely recognized in the scope of entryway actuation alternatives is by overhead Sensors on both sides of the opening.
The Standard Safety characteristics of the Automatic Swing Door incorporate presence Wellbeing Sensors mounted on the front and back edges of the entryway leaf.
Security is given by dead end and, to ensure against Climate Conditions, the entryway is fitted with Brush Seals and an Aluminum Limit.
The description of your door can be changed according to the requirements of site or on request