Galvanized Perforated Pin-hole Lath

[vc_row css=”.vc_custom_1599901789507{padding-top: 20px !important;padding-bottom: 30px !important;}”][vc_column][vc_column_text]Roller Shutters with Perforated Pin-hole Lath is Ideal for after working hours Security in many Retail and Commercial environments, such as Shops, Offices and Garage etc. When a high level of visibility is required.[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_column_text][supsystic-gallery id=32]

[/vc_column_text][/vc_column][/vc_row][vc_row css=”.vc_custom_1599901789507{padding-top: 20px !important;padding-bottom: 30px !important;}”][vc_column][vc_column_text]

Technical Information

  • Barrel
    For openings up to 6 metres wide. Constructed from 100mm steel tube mounted on 25mm steel bearings. Incorporating motor drive. For 6 metres and over 139mm tube.
  • Curtain
    Constructed from 75mm wide Curved Perforated Pin-hole Section, Interlocking Galvanized Steel Laths, finished with a Galvanized ‘L’ or ‘T’ Section Bottom Rail. Available in Polyester Powder Coated and RAL Colour or Standard Galvanized finish.
  • Side Guides
    Constructed from 3mm x 65mm Guide Channel Bolted to 75mm x 50mm Steel Angle.
  • Electrical Operation
    By means of Tubular Motor within Tube. Incorporating Up/Down Limits and Manual Over-ride for Emergency Operation. A Rocker Switch for Interior Operation and a Security Switch for Exterior Operation.
  • Electricity Supply
    240 Volt 1 Phase
  • Optional Extras
    Remote Control, Hood, Weather Seals, Fascia. Safety Break, Safety Beam Sensors, Bullet Lock (Guide Mounted Lock) and Bell Pad Lock (Floor Mounted Lock).
  • Manual Operation 
    Manual Self Coiling Operation also available.
  • Legislation Compliant
    Adhering to new Legislation requiring all Roller Shutters to comply with the Construction Products Directive (C.P.D), all doors manufactured by ERS Shop fitters are designed, manufactured and independently tested to meet the requirements of BS EN 13241: 2003.